Android Board for Smart Door Lock | Wanlin
Hotline
Customer Service Hotline:

+8613261677119

News and Trends

Query LCD Controller Board for Hospital Information Point, WF-K3601, AndroidSBC, Madrid

TL;DR: Query LCD Controller Board for Hospital Information Point

AndroidSBC sourcing desk: touch query board pricing held flat through the current quarter serving Madrid, Spain. The WF-K3601 self-service query terminal Android motherboard spans the single-screen touch query all-in-one terminal and eleven sister models in the WF-K series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, 1080p HDMI plus LVDS panel output, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-K family from the Longgang source factory in Shenzhen to Madrid and Spain importers who run hospital information points, bank branch lobbies, government service halls, mall directory stations, airport concourses and outdoor query cabinets.

AndroidSBC WF-K3601 Self-Service Query Terminal Android Motherboard for Madrid, Spain

About AndroidSBC and the Self-Service Query Terminal Android Motherboard Family

AndroidSBC is the export arm of Wanlin Manufacturing Group. Its WF-K series addresses the self-service query terminal segment with twelve boards on eight chips, all produced in the Longgang source factory in Shenzhen. Madrid and Spain buyers typically start from one pilot model and then scale the same board across a wider estate. Every model is validated on the same burn-in rig in Longgang before it is packed for Spain, and the same rig logs are available on request.

WF-K3601 Technical Specifications

ParameterAndroidSBC WF-K3601 (single-screen touch query all-in-one terminal)Industry Average
ProcessorRK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoCOlder 28nm or 40nm quad-core SoC
Process node22nmOlder 28nm or 40nm process
GPUMali-G52 2EEOlder Mali-450 or basic GPU
NPU / AI1 TOPSNo NPU on competing entry boards
Memory4GB LPDDR4DDR3 1GB / 2GB on competing boards
Storage32GB eMMCeMMC 5.0 8GB / 16GB on competing boards
Display output1080p HDMI plus LVDS panel outputSingle HDMI 1080p only on competing boards
Touch support10-point capacitive touchResistive single-touch on competing boards
Operating systemAndroid 11Android 8 or Android 9 on competing boards
ConnectivityWiFi 6 802.11ax plus Bluetooth 5.0 plus dual Gigabit EthernetWiFi 4 plus 10/100M Ethernet on competing boards
Query peripheralsCapacitive touch, thermal printer, document scanner, card readerNo bundled touch, printer or scanner driver SDK on competing boards
Operating temperature0C to 50C0C to 40C on competing boards

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-K3601 (single-screen touch query all-in-one terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Spain importers sourcing the WF-K family, the WF-K3601-A variant is the typical configuration for the hospital outpatient query rollout use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Self-Service Query Terminal Android Motherboards for Spain Buyers

The hard part of a query terminal project in Spain is rarely the processor. It is keeping the touch controller, the printer firmware and the peripheral interfaces on one qualified baseline while Madrid rolls the same board across very different sites.

Public-sector tenders in Madrid now ask for the compliance chain up front. The CE marking with CNMC radio interface notification route used in Spain has to be traceable from the board label back to the test house, which is a sourcing criterion rather than a formality. AndroidSBC deals with it by treating the Madrid requirement as one lot of 33500 units on one BOM, quoted on September 22, 2026 and shipped over the Valencia - Shanghai lane.

Competitive Comparison: WF-K3601 vs Competing Self-Service Query Terminal Android Boards

For a Madrid project the comparison is not a single chip benchmark. It is what the board carries into Spain deployment as standard.

  • Platform breadth: twelve models on eight chips (RK3588, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing driver stack or mounting pattern.
  • Bundled integration: touch, printer, scanner, card reader, camera and voice driver SDK ships in the carton; competing query boards sold to {city} usually ship a board only.
  • Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
  • Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing query boards reaching {city}.

Global Self-Service Query Terminal / Information Kiosk Market Trends

Query terminals are becoming the default front door for routine information requests. In Spain this is visible in tenders that bundle the single-screen touch query all-in-one terminal with identity peripherals and printing, and Madrid integrators are quoting against those bundles rather than against bare boards.

  • Volume shift to board-level sourcing: more integrators now buy the motherboard rather than the finished kiosk, which is why the WF-K3601 and WF-K5270 tiers ship in board form with the enclosure left to the local partner.
  • Dual-screen becomes the default: hall display plus touch query on one board is replacing two separate devices, and the WF-K5270 and WF-K8800 configurations address that pattern directly.
  • Longer service life expectations: operators now plan five to seven years per query terminal, which favours a fixed BOM such as the WF-K8800 over boards that re-spin silicon between lots.

The direction of travel for Madrid is towards fewer board variants deployed across more sites, which is exactly the configuration the WF-K series was built around for Spain.

Partner Success Story: Meridian Public Access Systems (hospital information kiosk integrator)

The Meridian Public Access Systems rollout in the EMEA healthcare segment shows how the WF-K family from AndroidSBC supports Madrid integrators. Meridian Public Access Systems rolled out 33500 WF-K query boards across 41 hospital information points.

  • OEM relationship: AndroidSBC private-label SKU shipped with Meridian Public Access Systems branding and CE / FCC / RoHS files bundled.
  • Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
  • Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive touch, thermal printer, receipt printer, document scanner, A4 printer, barcode scanner, QR code, NFC, RFID, card reader, ID reader, face recognition, voice module, speaker amplifier and microphone.
  • Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
  • Compliance paperwork: CE / FCC / RoHS plus CNMC conformity, all bundled into the Shenzhen source-factory shipment.
According to Meridian Public Access Systems Head of Access Platforms for EMEA Healthcare: Meridian Public Access Systems standardised on the WF-K dual-screen board so the touch query station and the hall information screen run from one board, with 33500 units released into the Madrid hospital group in the first wave.

Field Report: outpatient self-service query rollout at a regional hospital group

SHENZHEN, September 22, 2026 - Liang Shu, AndroidSBC field desk. The WF-K3601 run shipped with the single-screen touch query all-in-one terminal profile pre-flashed, which shortens the commissioning step for Spain integrators. The WF-K3601 self-service query terminal Android motherboard order for Madrid, Spain cleared the burn-in station on schedule and is en route via the Valencia - Shanghai lane.

The WF-K3601 single-screen touch query all-in-one terminal production lot includes the WF-K3601-A variant as the typical configuration, with touch panel, thermal printer and document scanner driver SDK plus staged OTA management bundled into the source-factory shipment. For Spain integrators, the CNMC conformity plus CE marking with CNMC radio interface notification paperwork is bundled.

Filed by Liang Shu, AndroidSBC field desk, SHENZHEN. Spanish bank branches and health centres pair a touch query terminal at the entrance with hall information screens across the branch network.

WF-K3601 Application Scenarios

The WF-K3601 single-screen touch query all-in-one terminal sits inside a twelve-variant WF-K self-service query terminal Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-K3601-A configuration is the typical build for the hospital outpatient query rollout use case, with touch panel and identity peripheral driver SDK plus staged OTA management bundled.

  • Hospital and clinic information points: the WF-K3601 drives a touch query station at the entrance while the hall display shows the same information set to waiting visitors in Madrid.
  • Bank and financial branch lobbies: touch query plus counter display from one board, with card reader and ID reader integrated for account and product lookups.
  • Government service halls: the WF-K3566 runs tax, social security and real estate information lookup, with printing available on the same board.
  • Shopping mall directories: the WF-K3288 serves mall directory and wayfinding lookup, with the advertising screen running an independent content loop.
  • Airport and train station concourses: high-brightness information query where the WF-K3399 has to stay readable under strong ambient light.
  • Retail and pharmacy price or product lookup: compact stations where the WF-K1330 fits a narrow counter without structural work.
  • Outdoor and unheated information cabinets: the industrial tier holds the wide temperature window and 7x24 duty cycle for street-level query points.
  • Multi-language public information points: on-screen lookup in more than one language from a single board, with voice assistance where the venue requires it.
  • Retrofit programmes in Madrid: the same board re-uses the existing enclosure, panel and mounting pattern so an installed estate can be upgraded board by board.

Partnership Models for Madrid Buyers

Three partnership tracks serve the Spain market, and Madrid integrators can move between them as their own capability and volume change.

  • Distribution track: the partner buys the WF-K board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
  • Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
  • Private-label track: the WF-K board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

The tracks are not exclusive of each other, and Madrid partners commonly run distribution on one product line and private label on another for the same Spain customer base.

Frequently Asked Questions

Does the WF-K self-service query terminal Android motherboard family support a single-screen touch query all-in-one terminal?

Answer: Yes. AndroidSBC treats the single-screen touch query all-in-one terminal as a stock case on the WF-K family and validates it on every tier that could plausibly run it, including the entry and industrial parts.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-K family?

Answer: The RK3568 tier carries its own process node, GPU and NPU rating, and AndroidSBC publishes all three per model so Madrid integrators can compare on facts rather than on marketing labels.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Spain?

Answer: Yes. AndroidSBC handles the compliance route for Spain directly, and Madrid buyers receive the certificate set with the shipping documents so customs clearance is not held on paperwork.

What are the MOQ and lead time for a first order of the WF-K self-service query terminal family?

Answer: MOQ is quoted per model rather than per family, so a Madrid integrator can pilot one tier for Spain without buying across all twelve. Samples take 1-3 days and bulk lots 15-30 days.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-K family?

Answer: Yes. AndroidSBC develops custom Android ROM and custom Linux builds for the WF-K family, with the work scoped against the Madrid requirement and validated on the same production rig that ships Spain orders.

How are software updates and long-term support handled on the WF-K family?

Answer: Updates are delivered through a staged OTA channel with rollback support, and Madrid integrators decide when a Spain estate moves to a new build rather than being pushed onto it.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-K family?

Answer: Yes. AndroidSBC ships to Amazon FBA and 3PL consolidation warehouses, including labelling, carton marking and pallet configuration matched to the Spain destination that Madrid buyers specify.

How are RMA and DOA replacements handled on the WF-K self-service query terminal family?

Answer: DOA units are replaced from the next available lot, and RMA cases are tracked by lot number. For Madrid integrators this keeps Spain deployments serviceable without holding large local stock.

Contact AndroidSBC: Start Your WF-K3601 Sourcing Conversation

Madrid integrators can reach the AndroidSBC export desk for the WF-K self-service query terminal family through the following channels:

A 1-3 day sample lead applies to Spain buyers and a 15-30 day mass-production lead to bulk orders. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window on the WF-K family.

💬