Power Input Interface, WF-X9-05, AndroidSBC, Madrid

TL;DR: Power Input Interface

AndroidSBC field desk: signage rollout map updated across retail, transport, hospitality and public venues serving Madrid, Spain. The WF-X9-05 X9 Android motherboard spans the infrared touch all-in-one for interactive kiosks and eleven sister configurations in the X9 series, all built on the A133 quad-core ARM Cortex-A53 1.6GHz SoC with the PowerVR GE8300 GPU, LVDS output at 1080p with 10-point infrared touch, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the X9 family from the Longgang source factory in Shenzhen to Madrid and Spain importers who run advertising players, digital signage networks, self-service query terminals, smart retail terminals, parcel lockers and access control panels.

About AndroidSBC and the X9 Android Motherboard Family

The twelve X9 configurations share one interface contract. A Spain distributor who starts on the 1GB plus 8GB LVDS tier for a shopfront player can step up to the 2GB plus 32GB tier with 4G for a connected network without changing the mounting pattern, the touch controller or the OTA workflow. Compliance paperwork is generated per destination: CE, FCC, RoHS and the local route for Spain, bundled with the lot so the importer clears customs without a second round of test reports.

WF-X9-05 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-X9-05 (infrared touch all-in-one for interactive kiosks) holds its LVDS or MIPI panel drive plus touch sampling while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For Spain importers sourcing the X9 family, the WF-X9-05-A variant is the typical configuration for the interactive kiosk rollout use case, on a 120x75mm six-layer board with four 3mm mounting holes and a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing X9 Android Motherboards for Spain Buyers

The seventh obstacle is lead time volatility. A Madrid network planning a mall opening cannot absorb a board that moves from a 15-day to a 60-day lead because a memory allocation disappeared.

For Madrid integrators worried about the trading-company risk, AndroidSBC ships from the same building the boards are built in. The source factory address is on the packing list, the test record carries a serial number, and the CE marking with CNMC radio interface notification route used in Spain is issued against that factory. The Madrid rollout passed its qualification gate on September 24, 2026, and 147400 boards were released into production the same week for the Valencia - Shanghai lane, with the sample and the volume lot built from the same component batch.

Competitive Comparison: WF-X9-05 vs Competing Commercial Display Android Boards

The X9 family was specified against the failure modes Madrid operators reported on previous rollouts, which is why the comparison reads the way it does.

• Panel and touch readiness: single or dual LVDS plus MIPI DSI at 30 or 40 pins, with infrared, optical, capacitive and resistive panels enumerating as HID devices, so Madrid integrators mount a locally sourced screen without a calibration pass.
• Bundled integration: panel jumper map, pin-one orientation note, touch HID configuration, playback modes and the peripheral driver set ship in the carton; competing display boards sold to Madrid usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the Madrid integrator to obtain.
• Long-term supply: onboard eMMC in 8GB, 16GB or 32GB, one fixed bill of materials per production lot and a seven-year firmware window, against the frequent component swaps seen on competing boards reaching Madrid.

Global Digital Signage and Commercial Display Market Trends

Video screens account for roughly 50.2 percent of the market by type and retail for about 50.1 percent by application. That matters to a Madrid buyer because it means the board is the part being specified, while the enclosure, the panel and the mounting hardware are often reused.

• Entry playback tier: WF-X9-05 covers loop, scheduled and interrupt playback on a single LVDS panel, which is the configuration most small signage networks standardise on.
• Interactive mainstream tier: WF-X9-10 pairs an LVDS or MIPI panel with infrared or capacitive touch for query, wayfinding and self-service kiosks.
• Connected and unattended tier: WF-X9-11 adds the 4G path, the -20C to 70C window and the watchdog behaviour that outdoor cabinets and parcel lockers require.

The Spain demand curve rewards the vendor who can hold a configuration. AndroidSBC publishes the X9 price list, MOQ and lead time because a Madrid partner is budgeting a multi-year refresh, not a single purchase order.

Partner Success Story: Meridian Display Systems (supermarket and retail media screen integrator)

A Meridian Display Systems deployment in the EMEA retail media segment illustrates how the X9 Android motherboard family supports Madrid integrators. Meridian Display Systems rolled out 147400 X9 boards across 68 supermarket and retail media screens.

• OEM relationship: AndroidSBC private-label SKU shipped with Meridian Display Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Allwinner A133 quad-core ARM Cortex-A53 1.6GHz with the PowerVR GE8300 GPU on every configuration, one fixed bill of materials per production lot.
• Peripheral driver package: bundled into the source-factory shipment, covering LVDS and MIPI panel drive, infrared, optical, capacitive and resistive touch, thermal printer, QR scanner, barcode scanner, NFC reader, RFID reader, ID card reader, fingerprint reader, camera and lock driver board.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus CNMC conformity, all bundled into the Shenzhen source-factory shipment.

In the words of Meridian Display Systems Head of Store Platforms for EMEA Retail Media: Meridian Display Systems standardised on the X9 board so one Android 10 image runs the whole estate, with 147400 units released into the Madrid grocery group in the first wave.

Field Report: interactive kiosk rollout at a municipal service point

NANSHAN, September 24, 2026 - Chu Lin, AndroidSBC field desk. The WF-X9-05 held its panel drive through the full 72-hour soak, with the backlight current measured against the documented 12V lane budget. The WF-X9-05 X9 Android motherboard order for Madrid, Spain cleared the burn-in station on schedule and is en route via the Valencia - Shanghai lane.

The WF-X9-05 infrared touch all-in-one for interactive kiosks production lot includes the WF-X9-05-A variant as the typical configuration, with LVDS or MIPI panel driver, touch HID configuration and staged OTA management bundled into the source-factory shipment. For Spain integrators, the CNMC conformity plus CE marking with CNMC radio interface notification paperwork is bundled.

Filed by Chu Lin, AndroidSBC field desk, NANSHAN. Spanish hospitality groups ask for Spanish and Catalan content templates and a pilot across a handful of sites before the national rollout.

WF-X9-05 Application Scenarios

The WF-X9-05 infrared touch all-in-one for interactive kiosks sits inside a twelve-configuration X9 Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-X9-05-A configuration is the typical build for the interactive kiosk rollout use case, with panel driver, touch HID configuration and staged OTA management bundled.

• Advertising machine and digital signage: the WF-X9-05 runs loop, scheduled and interrupt playback on an LVDS panel in shop windows and store aisles.
• Interactive query and wayfinding: the WF-X9-12 pairs a MIPI or LVDS panel with infrared or capacitive touch for lobby and hospital directories.
• Smart retail terminal and vending: the WF-X9-01 carries the scanner, the printer and the payment peripheral on one board in a compact enclosure.
• Parcel locker and fresh food cabinet: the WF-X9-02 drives the screen and the lock driver board from the two serial lanes, with the watchdog holding a 7x24 duty cycle.
• Face recognition access control: the WF-X9-03 takes the camera input and the door controller wiring on the same board.
• Conference tablet and teaching all-in-one: LVDS or MIPI panel drive with HID touch and the industry publishing software already validated.
• Industrial HMI and IoT gateway: headless or panel configurations on the same bill of materials, with GPIO, I2C, SPI, PWM and ADC available for field wiring.
• Hotel, building and campus information publishing: scheduled power cycling plus remote content push across a mixed estate of screens.
• Retrofit programmes in Madrid: the same 120x75mm board re-uses the existing enclosure, panel and mounting pattern, so an installed estate can be upgraded screen by screen.

Partnership Models for Madrid Buyers

For Madrid and Spain buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.

• Distribution track: the partner buys the X9 board against a published price list, keeps its own stock, and AndroidSBC supplies the panel files, the touch configuration and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, mounting drawings and panel validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the X9 board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed bill of materials held for the length of the agreement.

All three tracks give Madrid partners the same thing underneath: a factory-built board, a frozen bill of materials and a firmware window measured in years rather than months.

Frequently Asked Questions

Does the X9 Android motherboard family support an infrared touch all-in-one for interactive kiosks?

Answer: Yes - infrared touch all-in-one for interactive kiosks is supported across the X9 line, and the Madrid configuration is locked as the reference for later lots so re-orders behave identically.

Which configurations are available in the X9 family for Spain buyers?

Answer: Twelve configurations are offered and they all share one Android 10 image, so a Madrid partner can move between them without re-writing the application or re-qualifying the publishing software.

Can one X9 board drive an LVDS or MIPI panel plus infrared, capacitive or resistive touch?

Answer: It can. The X9 family is specified so one board carries the full site harness: panel, touch, printer, scanner and card reader, with no expansion card required.

What is the minimum order quantity and the sample lead time for Spain?

Answer: One board is enough to start: samples leave Longgang in 1-3 days. Volume orders run 15-30 days, and the Madrid partner can call off against a frame agreement rather than ordering in one block.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. The engineering desk handles custom ROM, boot branding, pre-installed apps, BSP porting and SDK modules, and the Madrid partner keeps the same image across re-orders.

How are firmware updates delivered to a Spain screen estate after deployment?

Answer: The OTA channel is staged and reversible. A Madrid network pushes to a pilot group first, and if a panel or touch regression appears the image rolls back to the previous build.

What shipping terms does AndroidSBC support for Spain orders?

Answer: FOB Shenzhen, CIF and EXW are quoted on the same price list. Export customs clearance and global shipping are handled from Longgang, and the Madrid partner receives tracking with the lot.

What happens if a board fails in the field in Spain?

Answer: Failures are handled against the serialised test record. AndroidSBC traces the unit to its lot, confirms the bill of materials, and ships a replacement from the Madrid call-off stock or the next production slot.

Contact AndroidSBC: Start Your WF-X9-05 Sourcing Conversation

To start an X9 Android motherboard sourcing conversation with AndroidSBC, a Wanlin Manufacturing Group export brand, Madrid integrators can reach the export desk through the following channels:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Madrid and Spain the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.